If you want your laser welding machine to last longer, it is necessary to maintain the machine regularly. After the laser equipment is used for a long time, the light emitted by the laser may become unstable. There are many reasons for this. It may be because the power supply is unstable, or it may be caused by some failure. When the laser welding machine is unstable, you must deal with it in time, repair and maintain the laser welding machine and clean the laser welding machine, so as not to affect the normal work efficiency and welding quality.
This type of equipment is generally equipped with a separate transformer. At this time, you can observe whether the temperature rise of the voltage regulating transformer is normal, whether there is abnormal discoloration or high temperature, check whether the carbon brush contact is normal, monitor whether the output and input voltage are normal, and whether there is an overload phenomenon.
Check whether the power connector of the laser device is damaged. If it is, it should be updated and repaired in time. Check whether the transformer is operating normally and whether the carbon brushes are intact. The damaged carbon brush should be replaced in time. If there is burning powder and carbon brush powder on the coil, it should be polished with fine sand in time to remove the dust.
The maintenance and cleaning of the laser welding machine requires regular cleaning of the dirt on the laser welding machine equipment and various parts, and also carefully check whether the conveyor belt chain is normal, oil the sprocket in time, adjust the tightness of the equipment chain, and check the carbon After swiping the holder, whether it is tilted or stuck, must be adjusted in time to avoid affecting the use.
