Chongqing Zixu machine works teach you to choose a few skills of cost-effective laser engraving machine
First of all, we must determine our own needs, choose the corresponding laser engraving machine for the application industry, so that there will be a general price range in the first place.
1. Determine the material of the carving
For example: engraving and cutting non-metal will choose non-metal laser engraving machine, metal processing will choose metal laser engraving machine, because the price difference between the two is very big, non-metal laser engraving machine is the cheapest only need about 20,000, and metal laser engraving machine is the cheapest start of more than 100,000.
2. To determine the processing format, that is, the size of the table
According to the application industry is not the same, the processing format of the laser engraving machine is not the same, the general laser engraving machine models are 6040, 9060, 1290, 1390, 1490, 1610, 1612, 1812.
For example: 6040 model is 600*400mm, laser engraving machine processing format is not the same, other configuration in the same case, the larger the format, the price will naturally rise.
3. Choose a highly professional and versatile machine
Though most of the function of laser engraving cutting material is more than one, but we still suggest to let professional within the territory, because in different industries in the field of processing applications, the corresponding professional customized models of laser engraving machine is generally aimed at optimization design was carried out on the laser engraving or cutting, achieve the result that far in excess of the general equipment.
For example: if engaged in the field of advertising, you should choose a professional laser engraving machine in the advertising industry. If you still insist on buying ordinary laser engraving machine, you must choose a laser engraving machine with a "knife bed" device. Remember: do not believe some manufacturers say that 60W, 80W machine can cut 20mm thick acrylic, this is not possible, even if barely can cut through, the cutting edge is terrible to see. According to small series of years of relevant industry experience for the normal value is: 60W laser engraving machine can cut 8-10mm acrylic, 80W laser engraving machine can cut 8-15mm acrylic.
